ARDROX 2526 is a non-flammable application type paint remover, designed to remove the more resistant types of polyurethane and epoxy surface coatings. The product
contains chlorinated solvents and phenolic materials.ARDROX 2526 readily removes air-cured polyurethane and epoxy paint schemes from aircraft skins, road transport vehicles and other painted surfaces. It is readily rinsed off with water, leaving a clean surface. ARDROX 2526 is particularly economical for the removal of paint from large
surfaces when the material is sprayed onto the surface. ARDROX 2526 is not suitable for removing paint from plastic materials, including glass fibre and carbon fibre reinforced laminates.
Method of use
ARDROX 2526 is best applied by spray. It may also be applied by brush as a thick, even layer, care being taken not to leave any dry or thinly covered areas. The
remover should remain in contact until the film is blistered over the whole surface. The bulk of the loosened paint can be removed with a wooden scraper,
followed by rinsing with a jet of water. Alternatively, the whole may be removed in one operation using an ARDROX high pressure wash rig.
Effects on materials
No significant corrosion is likely to be encountered when the product is used in the prescribed manner. ARDROX 2526 is specifically tested on aluminium alloy,
magnesium alloy, mild steel and cadmium plating. As conditions of use may vary
Ardrox 2526 considerably, particularly when dissimilar metals are in close contact, intending users are advised to check their specific requirements in this respect.
ARDROX 2526 will have a deleterious effect on rubbers and many plastics including polymethylmethacrylate (e.g. "Perspex" or "Plexiglas") and composite materials.
Intending users are advised to check the compatibility of ARDROX 2526 with their materials before use, and to mask off any areas on which the paint remover will
have a deleterious effect.
Technical information
Appearance: Reddish brown, viscous liquid.
Density: 1.24 g/ml at 20°C.
Flash Point: None.
Viscosity: 25 - 45 poise (Brookfield Viscometer)
These are typical values only and do not constitute a specification.
Store in a cool, dry place away from flammable materials and sources of ignition.
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login